Exhaust air heat pump RX65L

Reliable, easy to maintain and low-key. May we present the exhaust air heat pump RX65L, which by far gives the lowest total cost when compared to other heat pumps. It outputs up to 6.5 kW and boasts an award-winning user interface.

The smaller profile of RX65L enables it to where the RX65 would not. This exhaust air heat pump is suitable for large detached houses of approximately 180-260 m² or 1900-2800 ft²

By using the new R32 refrigerant, now available in all of our RX models, we have achieved higher efficiency while also being environmentally friendly. Furthermore, our RX models also have a lower noise level than their predecessors in the EX line of heat pumps.

The water heater holds 210 liters of water.

Our heat pumps give you by far the lowest total cost when compared with other models on the market. Thanks to the upgrade to R32 refrigerant (now default for all RX models) there’s higher efficiency coupled with lower environmental impact.

If you are interested in upgrading the unit to enable cooling functionality in addition to heating, this is easily achieved by installing our supply air unit T15. More information about this product can be found here.

RX65L is delivered with an adjustable 6 or 9 kW immersion heater.

Exhaust air heat pump RX65L

  • Award-winning interface
  • Lower total cost by a wide margin
  • Low noise level
  • High efficiency
  • More environmentally friendly than previous models

Interested in this product? Find your nearest retailer here!

Technical information Comfortzone RX65L
OUTPUT/SUPPLIED POWER AT 20(12)/35°C kW 6,3/1,6*
OUTPUT/SUPPLIED POWER AT 20(12)/50°C kW 6,5/2,1*
IMMERSION HEATER, POWER kW 6,0/9,0**
REFRIGERANT R32 kg 1.250
AIR FLOW m3/h 220-330
FLOW CIRCULATION PUMP(20 KPA) m3/h 0,8-2,0
WARM WATER, TEMPERATURE (ADJUSTABLE) C 50-60
WATER VOLUME, ACCUMULATOR TANK I DEPENDING ON EXTERNAL TANKVOLUME
WARM WATER, CAPACITY l/h 320/380 l/h
VOLTAGE V 400 (3-phase+N)
ALTERNATIVE VOLTAGE V 230 (3-phase+N)
FUSE A 16
HEIGHT mm 1600
WIDTH mm 600
DEPTH mm 650
WEIGHT kg 175
TEMPERATURE SENSOR OUTDOORS+INDOORS OUTDOORS OR INDOORS



* The power data at 20 (12) / 35 °C and 20 (12) / 50 °C is stated according to European standard EN255 without fans and pumps. The indicated temperatures 20 °C indicates air temperature for indoor air and (12) °C indicates the air wet temperature link.

** Delivered with 6 kW immersion heater. The immersion heater is adjustable to enable compliance with current Swedish regulations regarding newly constructed houses.

Note: When comparing with geothermal heat pumps the power consumption of the brine pump must be taken into account. A corresponding geothermal heat pump loses up to 10-20% input power and COP by pumping the refrigerant 100-150 meters up and down the borehole.
  • Suitable for: 180-260 m2
  • Replacement:
  • New construction:

Other products

Property heat pump RXF

Property heat pump RXF

The heat pump provides the property's entire heat and hot water supply and recovers the ventilation air optimally. Lo...

Read more
ComfortZone RX-C35 Cooling machine

ComfortZone RX-C35 Cooling machine

ComfortZone RX-C35 cooling machine provides about 210 liters of hot water and is perfect for single-family homes. Als...

Read more
ComfortZone RX-C50 Cooling machine

ComfortZone RX-C50 Cooling machine

ComfortZone RX-C50 cooling machine provides about 210 liters of hot water and is optimal for single-family homes. Als...

Read more
ComfortZone heat pump synchronized with solar panels

ComfortZone heat pump synchronized with solar panels

ComfortZone EX heat pump has a built-in function for synchronization with solar panel systems for electricity product...

Read more
More products