Exhaust air heat pump RX65

If you are in the market for a set-and-forget heat pump and have the need to heat a large house (180-260 m² or 1900-2800 ft²), the RX65 is well worth your consideration. Its robust construction and minimal noise output complemented by an award-winning design and interface. This pump holds 210 liters in its water heater and outputs 6.5 kW; a reliable heat pump, built to last a long time.

Lower total cost and environmentally friendly

No other heat pumps on the market contribute as much to energy savings as a ComfortZone. In addition, thanks to the refrigerant R32, it is a more environmentally friendly choice, and it comes with higher efficiency in the bargain.

If you want the opposite function; cooling, you need to install an additional supply air unit, T15. More information about this product can be found here.

Exhaust air heat pump RX65

  • Award-winning interface
  • Lowest total cost by a wide margin
  • Low noise level
  • High efficiency
  • More environmentally friendly than previous models

Interested in this product? Find your nearest retailer here!

Technical information Comfortzone RX65
OUTPUT/SUPPLIED POWER AT 20(12)/35°C kW 6,3/1,6*
OUTPUT/SUPPLIED POWER AT 20(12)/50°C kW 6,5/2,1*
IMMERSION HEATER, POWER kW 6,0/9,0**
REFRIGERANT R32 kg 1.250
AIR FLOW m3/h 220-330
FLOW CIRCULATION PUMP(20 KPA) m3/h 0,8-2,0
WARM WATER, TEMPERATURE (ADJUSTABLE) C 50-60
WATER VOLUME, ACCUMULATOR TANK I 210
WARM WATER, CAPACITY l/h 320/380 l/h
VOLTAGE V 400 (3-phase+N)
ALTERNATIVE VOLTAGE V 230 (3-phase+N)
FUSE A 16
HEIGHT mm 2100
WIDTH mm 600
DEPTH mm 650
WEIGHT kg 210
TEMPERATURE SENSOR OUTDOORS+INDOORS OUTDOORS OR INDOORS



* The power data at 20 (12) / 35 °C and 20 (12) / 50 °C is stated according to European standard EN255 without fans and pumps. The indicated temperatures 20 °C indicates air temperature for indoor air and (12) °C indicates the air wet temperature link.

** Delivered with 6 kW immersion heater. The immersion heater is adjustable to enable compliance with current Swedish regulations regarding newly constructed houses.

Note: When comparing with geothermal heat pumps the power consumption of the brine pump must be taken into account. A corresponding geothermal heat pump loses up to 10-20% input power and COP by pumping the refrigerant 100-150 meters up and down the borehole.
  • Suitable for: 180-260 m2
  • Replacement:
  • New construction:

Other products

Supply air unit ComfortZone T15

Supply air unit ComfortZone T15

Supply air unit ComfortZone T15 is intended for cooling / heating and distribution of supply air in villas with a wat...

Read more
Property heat pump RXF

Property heat pump RXF

The heat pump provides the property's entire heat and hot water supply and recovers the ventilation air optimally. Lo...

Read more
Exhaust air heat pump RX65L

Exhaust air heat pump RX65L

Exhaust air heat pump RX65L provides up to 6.5 kW and fits houses between 180 - 260 sqm. Affordable. Reliable. Long s...

Read more
ComfortZone heat pump synchronized with solar panels

ComfortZone heat pump synchronized with solar panels

ComfortZone EX heat pump has a built-in function for synchronization with solar panel systems for electricity product...

Read more
More products