Exhaust air heat pump RX50

RX50 is a reliable and easy to maintain heat pump intended for use in houses of approximately 120-180 m² or 1300-1900 ft². It is boasting an award-winning interface and stylish design. Furthermore, this heat pump gives you by far the lowest total cost among the heat pumps available on the market, has a lower noise level than previous models and is an environmentally friendly choice.

Durable heat pump with many advanced features

All models in our RX series (formerly EX) are equipped with the refrigerant R32 which provides higher efficiency and a lower environmental impact. With our three different RX models ComfortZone have also achieved a significantly lower noise level compared to similar heat pumps in this class.

RX50 provides up to 5kW and has a 210 liter water heater. If you want the opposite function; cooling, you need to install an additional supply air unit, T15. More information about this product can be found here.

Exhaust air heat pump RX50

  • Lowest total cost by a wide margin
  • Low noise level
  • High efficiency
  • More environmentally friendly than previous models
  • Even less environmental impact than previous models

Interested in this product? Find your nearest retailer here!

Technical information Comfortzone RX50
OUTPUT/SUPPLIED POWER AT 20(12)/35°C kW 4,8/1,2*
OUTPUT/SUPPLIED POWER AT 20(12)/50°C kW 4,8/1,6*
IMMERSION HEATER, POWER kW 6,0**
REFRIGERANT R32 kg 1.250
AIR FLOW m3/h 150-240
FLOW CIRCULATION PUMP(20 KPA) m3/h 1,6
WARM WATER, TEMPERATURE (ADJUSTABLE) C 50-60
WATER VOLUME, ACCUMULATOR TANK I 210
WARM WATER, CAPACITY l/h 300 l/h
VOLTAGE V 400 (3-phase+N)
ALTERNATIVE VOLTAGE V 230 (3-phase+N)
FUSE A 16
HEIGHT mm 2100
WIDTH mm 600
DEPTH mm 650
WEIGHT kg 210
TEMPERATURE SENSOR OUTDOORS+INDOORS OUTDOORS OR INDOORS



* The power data at 20 (12) / 35 °C and 20 (12) / 50 °C is stated according to European standard EN255 without fans and pumps. The indicated temperatures 20 °C indicates air temperature for indoor air and (12) °C indicates the air wet temperature link.

** Delivered with 6 kW immersion heater. The immersion heater is adjustable to enable compliance with current Swedish regulations regarding newly constructed houses.

Note: When comparing with geothermal heat pumps the power consumption of the brine pump must be taken into account. A corresponding geothermal heat pump loses up to 10-20% input power and COP by pumping the refrigerant 100-150 meters up and down the borehole.
  • Suitable for: 120-180 m2
  • Replacement:
  • New construction:

Other products

Supply air unit ComfortZone T12

Supply air unit ComfortZone T12

Supply air unit ComfortZone T12 is intended for cooling / heating and distribution of supply air in villas with a wat...

Read more
ComfortZone RX-C50 Cooling machine

ComfortZone RX-C50 Cooling machine

ComfortZone RX-C50 cooling machine provides about 210 liters of hot water and is optimal for single-family homes. Als...

Read more
Exhaust air heat pump RX35L

Exhaust air heat pump RX35L

Exhaust air heat pump RX35L is low-built. gives up to 3.5 kW and fits nicely into houses between 60 - 120 sqm. Afford...

Read more
Exhaust air heat pump RX65L

Exhaust air heat pump RX65L

Exhaust air heat pump RX65L provides up to 6.5 kW and fits houses between 180 - 260 sqm. Affordable. Reliable. Long s...

Read more
More products