Exhaust air pump RX35

RX35 is a highly efficient and easy to maintain heat pump with an award-winning user interface. It is suitable for houses of 60-120 m² (or 650-1300 ft²), it has high operating efficiency and is more environmentally friendly than previous models. It gives you by far the lowest total cost among the heat pumps available on the market, to name just a few of its fine qualities.

Low noise level

The RX series is available in three different sizes to match different needs. All of our heat pumps and cooling pumps use the new refrigerant R32 which allows for higher efficiency coupled with lower impact on the environment. Our new heat pumps in the RX series also measure significantly lower noise level than their predecessors.

RX35 gives up to 3.5 kW and has a 210 liter water heater. If you want to get the reverse function, cooling, an additional supply air unit is needed; T15. More information about this product can be found here.

Features of exhaust air heat pump RX35

  • High-powered
  • Award-winning user interface
  • High operating efficiency
  • Low noise
  • Even less environmental impact than previous models

Interested in this product? Find your nearest retailer here!

Technical information Comfortzone RX35
OUTPUT/SUPPLIED POWER AT 20(12)/35°C kW 3,4/0,8*
OUTPUT/SUPPLIED POWER AT 20(12)/50°C kW 3,5/1,1*
IMMERSION HEATER, POWER kW 6,0**
REFRIGERANT R32 kg 1.250
AIR FLOW m3/h 100-160
FLOW CIRCULATION PUMP(20 KPA) m3/h 1,6
WARM WATER, TEMPERATURE (ADJUSTABLE) C 50-60
WATER VOLUME, ACCUMULATOR TANK I 170
WARM WATER, CAPACITY l/h 260 l/h
VOLTAGE V 400 (3-phase+N)
ALTERNATIVE VOLTAGE V 230 (3-phase+N)
FUSE A 16
HEIGHT mm 2100
WIDTH mm 600
DEPTH mm 650
WEIGHT kg 210
TEMPERATURE SENSOR OUTDOORS+INDOORS OUTDOORS OR INDOORS



* The power data at 20 (12) / 35 °C and 20 (12) / 50 °C is stated according to European standard EN255 without fans and pumps. The indicated temperatures 20 °C indicates air temperature for indoor air and (12) °C indicates the air wet temperature link.

** Delivered with 6 kW immersion heater. The immersion heater is adjustable to enable compliance with current Swedish regulations regarding newly constructed houses.

Note: When comparing with geothermal heat pumps the power consumption of the brine pump must be taken into account. A corresponding geothermal heat pump loses up to 10-20% input power and COP by pumping the refrigerant 100-150 meters up and down the borehole.
  • Suitable for: 60-120 m2
  • Replacement:
  • New construction:

Other products

ComfortZone heat pump synchronized with solar panels

ComfortZone heat pump synchronized with solar panels

ComfortZone EX heat pump has a built-in function for synchronization with solar panel systems for electricity product...

Read more
ComfortZone RX-C35 Cooling machine

ComfortZone RX-C35 Cooling machine

ComfortZone RX-C35 cooling machine provides about 210 liters of hot water and is perfect for single-family homes. Als...

Read more
Exhaust air heat pump RX65L

Exhaust air heat pump RX65L

Exhaust air heat pump RX65L provides up to 6.5 kW and fits houses between 180 - 260 sqm. Affordable. Reliable. Long s...

Read more
Exhaust air heat pump RX35L

Exhaust air heat pump RX35L

Exhaust air heat pump RX35L is low-built. gives up to 3.5 kW and fits nicely into houses between 60 - 120 sqm. Afford...

Read more
More products